Results 1 to 3 of 3
Thread: 3D Pinted UV Manicure Lamp
-
09-06-2014, 06:22 AM #1
3D Pinted UV Manicure Lamp
Adafruit is at it again. This time a nifty 3D printing project for the women out there, or some men ('Not that there is anything wrong with that'). The project is for a UV nail curing station. The thing is small, and will allow for easy traveling. The entire video can be found at the article which Bridget wrote up this morning, located here: http://3dprint.com/14082/3d-manicure-lamp/
Let us know if you have created this for yourself or your wife. Please post some pictures as well as feedback in this thread. Below is a picture of the finished UV nail manicure lamp:
-
09-06-2014, 06:44 PM #2
- Join Date
- Apr 2014
- Posts
- 228
Looking at the BOM, one can buy a UV manicure lamp outright on Amazon for much less, $25 or less. Just looking at a few items, that's easily more than $60 in parts there. Granted, some of that is for battery operation, I didn't look if the Amazon ones do that.
Last edited by JRDM; 09-06-2014 at 07:12 PM.
-
09-07-2014, 07:41 PM #3
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help