Results 1 to 8 of 8
Threaded View
-
11-21-2013, 01:58 PM #6
- Join Date
- Nov 2013
- Location
- Northeastern University, Boston MA
- Posts
- 3
Keep in mind that in order to have a successful heated bed you need three things.
1. A large enough power supply (150W in this case, normal backers w/o the heated bed only get a 100W supply)
2. Some kind of heating element/pad
3. A new build platform to go over the heating element/pad
Also, keep in mind that anything you buy off of ebay may not be compatible or may not fit. While it may only be $20 for the heated bed, you still need to buy the power supply which would be another $15-$20. But for just $35 more you can get a legitimate power supply, good heating element, and what I presume to be a fantastic basalt build platform. Just my two cents
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion