Results 1 to 10 of 107
-
08-26-2014, 01:41 PM #1
E3D - Earn an Additional Entry For Answering This Question
This is a question posed by E3D.
Earn 1 additional entry for replying to this thread and answering the following question:
What material (Other than ABS/PLA) do you print with the most, or want to print with the most?
-
09-02-2014, 12:03 PM #2
- Join Date
- Apr 2014
- Posts
- 34
Faux metal like bronzefill
-
09-02-2014, 12:44 PM #3
- Join Date
- Sep 2014
- Posts
- 31
Want to print with Wood ! Yet to try though.
-
09-02-2014, 01:59 PM #4
- Join Date
- Sep 2014
- Posts
- 16
I am dying to print with Ninjaflex (or another flexible filament).
I have some T-Glase which I am also dying to print with but haven't been able to due to extruder issues.
-
09-02-2014, 02:25 PM #5
- Join Date
- Jun 2014
- Posts
- 48
PET and PET+ from madesolid.com
-
09-02-2014, 02:32 PM #6
- Join Date
- Sep 2014
- Posts
- 31
I print with PLA, but Nylon and water dissolvable materials in combination with faux metals could be awesome!
-
09-02-2014, 05:37 PM #7
- Join Date
- Apr 2014
- Posts
- 35
I really want to print wood, seems super cool.
-
09-02-2014, 06:07 PM #8
I want to print most with nylon because it has the most favourable physical properties.
-
09-02-2014, 06:09 PM #9
- Join Date
- May 2014
- Posts
- 100
Ninjaflex and carbon nanotube filament would be the most desirable filaments to print with.
-
09-03-2014, 01:17 AM #10
- Join Date
- Feb 2014
- Posts
- 35
Wood, metal and conductive materials.
Cura slicer issue
09-13-2024, 02:44 AM in 3D Printing Slicer Discussion