Results 1 to 8 of 8
Threaded View
-
08-25-2014, 02:44 PM #8
- Join Date
- Aug 2014
- Posts
- 25
it was the firmware on the ramps. it was for the 8" i3v. so it would cut off the print. updated the the 10" version and all is going smooth.
it was the firmware on the ramps. it was for the 8" i3v. so it would cut off the print. updated the the 10" version and all is going smooth.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion