Results 1 to 9 of 9
Threaded View
-
08-23-2014, 12:51 PM #4
- Join Date
- Mar 2014
- Posts
- 84
Very much indebted to you, jimc, it worked perfect. I also upped my bed temp to 60c (IR thermometer showed I was running about 5c cooler than setting), and got in to Skeinforge and tweaked all first layer settings to 40% (they were all set at 90%). Perfect prints almost finished on both printers.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help