Results 1 to 10 of 189
Thread: Show your MODS
Threaded View
-
08-10-2014, 09:47 PM #11
RAMPS LCD Spacer
My LCD was rattling and buzzing as the printer was printing, and I was never comfortable with the way the LCD screws caused the PC board to flex, so I printed some spacers so I could tighten the LCD screws down without causing damage to the board. I re-mounted the LCD with the spacers and nylon lock nuts, and this solved the vibration problem.
I also used sandwiched some strips of double-sided tape between the boards to keep them from rattling against each other.
The spacer can be downloaded here: http://www.thingiverse.com/thing:335589
2014-05-18_15.45.34_preview_featured.jpg
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help