Results 1 to 4 of 4
Threaded View
-
08-08-2014, 05:29 AM #3
- Join Date
- Jun 2014
- Posts
- 349
My understanding is drift is always a mechanical thing, usually a belt, or a loose X motor wire or endstop switch/wire (if drift is in the X)
My understanding is drift is always a mechanical thing, usually a belt, or a loose X motor wire or endstop switch/wire (if drift is in the X)
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion