Results 1 to 5 of 5
Threaded View
-
07-29-2014, 05:24 AM #3
try a little lithium grease on the bars. Could just be friction causing the vibration.
I just spray some on asheet of kitchen paper and wipe all the bars - so far about once a week (well only had it 2 weeks)
I did notice after about a week that I was getting slightly more noise, wiped the bars again and it went away.
Friction is not your friend :-)
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion