Close



Results 1 to 4 of 4
  1. #1
    Administrator Eddie's Avatar
    Join Date
    Sep 2013
    Location
    Cape Coral, FL
    Posts
    1,844
    Follow Eddie On Twitter Add Eddie on Facebook Add Eddie on Google+ Add Eddie on Shapeways Add Eddie on Thingiverse

    New CoreXZ 3D Printer

    A man named Nicholas Seward has designed and created a new type of 3D pritner that uses CoreXZ geometry rather than the customary CoreXY. It is a more affordable machine to build and it is capable of higher Z direction resolution. He built the printer for around $500 but he believes he can create one for as little as $250. Read more about this interesting new 3D printer and check out the video at: http://3dprint.com/10249/corexz-3d-printer-collapsible/


  2. #2
    Staff Engineer
    Join Date
    Dec 2013
    Location
    Georgia
    Posts
    934
    Most of Seward's designs are mostly a novelty (though I'm a believer in the GUS becoming more mainstream eventually, it has some issues in ironing out the firmware right now.) The CoreXZ seems to have surprised everyone in that it's actually a conventional printer that is rock-solid from his demos of it.

    He didn't seem to express any interest in selling a big number of kits of it himself, but I wouldn't be surprised if some big name in RepRaps picks up the design to mass-produce.

  3. #3
    Engineer-in-Training
    Join Date
    Apr 2014
    Posts
    228
    CoreXZ is interesting. It does away with a bunch of issues with z screws, though I don't remember if there's a counterbalance to keep the axis from crashing on power cut.

    The article's explanation of CoreXZ doesn't fly though. The Z of RepRaps have a lot more resolution because of the threaded rods or lead screws.

  4. #4
    Quote Originally Posted by JRDM View Post
    CoreXZ is interesting. It does away with a bunch of issues with z screws, though I don't remember if there's a counterbalance to keep the axis from crashing on power cut.

    The article's explanation of CoreXZ doesn't fly though. The Z of RepRaps have a lot more resolution because of the threaded rods or lead screws.
    When properly tensioned (I have printed 4kg+ without a retension.) the gantry won't fall.

    The article was just pointing out that in a CoreXY arrangement that you have the same resolution in both the X and the Y direction. The CoreXZ has a 3:1 reduction in the Z direction. This is less resolution than screws offer but more than enough for <100um printing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •