Results 1 to 4 of 4
Threaded View
-
07-17-2014, 08:28 AM #3
- Join Date
- Jul 2014
- Posts
- 2
Hi Roxy,
Thanks for the recommendations and files! Unfortunaltly I have zero experience with 3D modelling so if you would like to place the map on there that would be a great help!
I've attached an .stl worldmap. Can you let the continents pop out 1mm, with half of the map on one scale and the other half on the other scale?
World_map_stl.stl
Good idea about the metal printing, I will definitly check it out!
Thanks in advance!
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help