Results 1 to 10 of 19
Thread: I'm About to Buy a Form 1+
Threaded View
-
07-10-2014, 01:59 PM #8
- Join Date
- Jan 2014
- Location
- Oakland, CA
- Posts
- 935
I'm on my second Form1, and I'm having that same problem, where a print will be almost done, but then instead of adhering to the model, a new layer of cured resin will adhere to the bottom of the vat instead, and have to be scraped off. I'm wondering if the higher powered laser in the Form1+ will cure the layers better, so that this won't happen. So far, Tech Support hasn't come up with a good explanation of why this might be happening, but they told me it's a "very rare problem". So I guess we're both special...
Andrew Werby
www.computersculpture.com
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help