Results 11 to 14 of 14
-
04-09-2014, 08:57 PM #11
- Join Date
- Apr 2014
- Posts
- 4
I agree! I am overwhelmed by the amount of responses I have received already! As for the scale being off on my model, I'm not sure why this happens. It seems any model I export from SketchUp to a .stl is always very small.
-
04-10-2014, 12:32 PM #12
- Join Date
- Apr 2014
- Posts
- 5
The oversize scaling seems to be a sketchup thing. I find that if I export the stl from sketchup, run through netfabb for repair and 're-export, then import the stl back into sketchup, it's hugely over scaled. So I work strictly one way...SU to netfab to slic3r.
Great tip on setting the contrasting face colours though...learn something new every day.
Cheers.
-
04-11-2014, 09:08 PM #13
-
07-10-2014, 04:09 AM #14
- Join Date
- Jul 2014
- Location
- New York, NY, United States Of America
- Posts
- 5
There are a few encounters in the sketch information that need treating - they're inner rather than exterior. The standard plan creates it a little challenging to choose them out, but you can modify the configurations to create it easer.
Last edited by Geoff; 08-03-2014 at 04:27 AM. Reason: removed advertising, post necro
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery