Results 1 to 9 of 9
Threaded View
-
07-09-2014, 01:41 PM #2
- Join Date
- Jan 2014
- Location
- Oakland, CA
- Posts
- 935
I don't think you need to use the heated bed when printing PLA - the combined heat of the extruder and the bed might be causing your scorching issues and remelting the plastic to cause the slumping.
Andrew Werby
www.computersculpture.com
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion