Results 1 to 10 of 73
Threaded View
-
07-03-2014, 10:24 AM #4
- Join Date
- Apr 2014
- Posts
- 50
Not particularly, and the power consumption difference between the 8" and 10" is pretty negligible, to be honest. The worst case is that there's more room to screw up and waste plastic!
Colin hasn't posted a build guide specifically for the 10" version (he links to the 8" guide, which is essentially the same, just smaller frame), so it's likely the same wiring-wise as well. The kit does NOT include a bed relay, so that suggest power for bed wiring is the same (needs an ATX power supply with TWO 2x2 square 12v leads outputting at least 11A each).Last edited by 1stage; 07-03-2014 at 10:29 AM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion