Results 1 to 10 of 757
Threaded View
-
06-25-2014, 05:38 PM #11
- Join Date
- Jun 2014
- Posts
- 37
Well we might be getting somewhere just not sure if its one forward two back. I installed pronterface and I can now move the nozzle down to the bed using the jogging control but it still moves away from the bed when issued a G1 command. I havent tried a test print to see if it will work on its own yet but not hopeful. I also tried to issue G29 n4 and G29 n5 and was given this error
>>>g29 n 5
SENDING:G29 N 5
Error:Line Number is not Last Line Number+1, Last Line: 0
[ERROR] Error:Line Number is not Last Line Number+1, Last Line: 0
Resend: 1
>>>g29 n 4
SENDING:G29 N 4
Error:Line Number is not Last Line Number+1, Last Line: 0
[ERROR] Error:Line Number is not Last Line Number+1, Last Line: 0
The v and t parameter still work.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion