Results 1 to 10 of 10
Threaded View
-
06-22-2014, 01:45 PM #8
P.).S.
Received mine last week. Busted box. 5 Missing bolts (small and large metric and SAE), missing weird metric set scew, missing critical bushing/spacer ( one of the blue plastic items), missing wire couplers. Improperly machined or unfinished machining on 1 MDF/melamine part (notches and thru holes) Several trips to a hardware supplier and my shop enabled us to complete the build. My brightest engineering student and I required 16 hour of his time and my time combined to assemble. The melamine over MDF material of the chassis and structural components is pure garbage and not up to the task of being the framework for a machine with moving parts. The idea is even absurd: some parts were worn after just assembling the unit. Incredulous that this material was chosen by the company. 12 hours into downloading drivers, running tests, diagnosing problems, problem solving and more tests have thus far failed to yield any good prints. The x axis is off calibration and we are at this point unable to resolve this defect. It shocks me that there is absolutely no printed material packaged with the unit. Nothing, even a business card: there is absolutely no information that accompanies the broken box of deficient parts. I believe my firm was duped by some folks who I can classify as swindlers. This assemblage of parts and trash is not a viable printer by any means. I will not be able to keep this opinion to myself.
Last edited by randycastell; 06-22-2014 at 01:52 PM.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help