Results 1 to 10 of 10
Threaded View
-
06-18-2014, 04:26 PM #2
- Join Date
- Mar 2014
- Location
- Vienna
- Posts
- 47
I´m using a simple 4 mm float glass in my I3 and have no problems with it. The important thing is that you´ll need a heat bed which spreads the temperature equaly over the whole area. I heat my glass up to 125°C, no issues with that temperature.
Last edited by ciutateivissa; 06-18-2014 at 04:46 PM.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion