Results 1 to 10 of 19
Thread: Crimping vs Soldering
Threaded View
-
06-18-2014, 02:53 PM #3
- Join Date
- Mar 2014
- Location
- Vienna
- Posts
- 47
For all machines with moving parts is criping not an option!
Printers move quite rapidly and have usually thin wires, especially at the extruder where the termistor is connected. If you have a wiring problem there the result would be a mess - hot end overheated, extruder melted and printer close to burning.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)