Results 1 to 7 of 7
Thread: New test prints and tips
Threaded View
-
06-18-2014, 12:00 PM #3
- Join Date
- May 2014
- Posts
- 60
The stemwinder was printed at 30mm/s - slow, but not painfully so.
The first drawer pulls were printed face down with a 0 deg. infill angle to get an interesting grain effect on the front surface.
The second drawer pulls were actually printed as 3 pieces (1 bar and 2 stand-offs). People love printing things as a single piece, but some things are a lot easier to print as multiple parts.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion