Results 1 to 10 of 40
Thread: Could use some advice
Threaded View
-
06-17-2014, 11:39 AM #12
Some Prusa i3 use a laser cut, wood frame and others use a metal frame. For a host of reasons, I feel the metal frame is worth the extra cost. I have built several Prusa i3 and they print very well and gave a generous build area. Last month I built a Kosell Delta printer " just because" and it was a fun, fast build and prints nice, but not as good as the Prusa. My son send I presently have six printers in our printer farm, half are built from scratch and half are production machines, so we have some that cost around $500.00 to over $4,000.00. Done with a single extruder and some with multiple extruders. Each gas advantages and drawbacks.
if you are still thinking of building a Prusa, visit our website and check out our BOM and our build instructions. We have had dozens of our kits built and none have taken more than a weekend.
Www.botbuilder.net
Last edited by JohnA136; 06-17-2014 at 01:56 PM. Reason: Added url
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help