Vivedino Troodon 2.0 Printing issues.

[mdewayne7]

Yesterday, after looking at a prusaslicer profile I obtained from TeamGloomy specifically for the Troodon 2 and comparing it to the profile we are using with simplify3d, I suggested we change the max volumetric speed from no limit to the 11 mm3/s that was set up in the prusa profile. I'm hoping that that will get us back on track.

I thought I would offer pics, if you have time to take a look and see if you spot anything that stands out.

A side note about this print is that it is near max print size at something like 340 X 340. This is the largest print we have attempted. Fail 2 is a different print, our second largest attempt.