Results 1 to 10 of 38
Thread: Surface Smoothness
Threaded View
-
06-14-2014, 01:37 AM #30
- Join Date
- May 2014
- Location
- San Francisco
- Posts
- 31
Hi Valter - thanks for your interest. The build volume is 70mm x 40mm x 240mm at 37 micron resolution. The build volume is 192mm x 108mm x 240mm at 100 micron resolution. 26 microns would only be possible with the lens modification (users will have to do the modification themselves). Thanks!
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion