Results 1 to 3 of 3
Threaded View
-
04-28-2024, 02:12 PM #2
- Join Date
- May 2020
- Posts
- 627
Could be......
Extruder gears clogged with filament from grinding the filament.
Extruder tension needs increasing but not if it's grinding filament.
Filament route has too much friction or tight spot.
Filament trapped under windings on spool..
I think I saw a video by Chep on Youtube about extruder tension arm problems.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion