Results 1 to 6 of 6
Threaded View
-
03-31-2024, 10:15 AM #2
- Join Date
- May 2020
- Posts
- 632
Suggestion........
Print perhaps 6-9 random 50mm x 50mm squares just 0.2mm thick on your bed.
This should show you how level your bed is and also if you need to adjust the 'Z' offset.
I think your nozzle is too close to the bed or is partially clogged.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help