Results 1 to 9 of 9
Threaded View
-
01-20-2024, 02:53 AM #2
- Join Date
- May 2020
- Posts
- 625
Guessing here......
Could be filament trapped under another winding on the reel, also check the route of the filament from the reel to the extruder.
In the pic it looks like filament is being pulled sideways of the reel.
Should there be a bowden tube to feed the filament through?
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help