Results 1 to 9 of 9
Threaded View
-
01-19-2024, 10:05 AM #9
- Join Date
- Jan 2024
- Posts
- 16
Yes i level every time so its not a question. I did normal manual first to set the 3 spinners, then quick automatic before each print. Im using the qidi slicer to slice and print. I never had a level fail.
The last print i did with the film removed was acceptable. As long as they continue to stick and not pop off mid print.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion