Results 1 to 5 of 5
Thread: Ender 3 s1 Pro weird behaviour
Threaded View
-
01-16-2024, 03:22 PM #2
- Join Date
- May 2020
- Posts
- 625
Try increasing the 'Z' offset by +0.01 or +0.02.
Clean the bed with some IPA before printing
Try increasing the 'Z' offset by +0.01 or +0.02.
Clean the bed with some IPA before printing
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help