Results 1 to 8 of 8
Thread: PETG balling up on the Nozzle
Threaded View
-
01-08-2024, 12:30 PM #8
- Join Date
- May 2020
- Posts
- 626
Also try raising temp in 5 degree increments.
It might even just be a bad roll of filament.
Also try raising temp in 5 degree increments.
It might even just be a bad roll of filament.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion