Results 1 to 5 of 5
Threaded View
-
12-06-2023, 04:53 AM #2
- Join Date
- May 2020
- Posts
- 623
If it's just a flat piece you are printing then a raft seems pointless, try the print without a raft. Disable raft in the slicer first.
Draw a 200x100 shape with your holes in whatever software you use, extrude it to 1mm thick and export it as an stl, .obj or .3mf file to use in your slicer
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help