Quote Originally Posted by Bikeracer2020 View Post
There should be a slicer setting that prevents travel over printed parts, that might help.
not as far as i can see. There is only "Combing"..which, when activated, makes the nozzle travels only over printed parts, i guess in order to reduce dripping/ strining. If you turn it off, it will always go straight to the next point, it might cross empty areas, but it will still cross printed parts. Its physically not possible to print without moving the nozzle over printed parts. already tried with combing on and off. And there Z-hop, but almost everybody says you should avoid it and you should instaed find the root of the problem, not just trying to navigate around the symptoms. I tend to agree.

I tried all kind of Z-offsets now, even changed it while printing-doesnt seem to do anything.