Results 1 to 3 of 3
Thread: 3D-printer - printable cleats
Threaded View
-
09-14-2023, 09:44 AM #2
- Join Date
- May 2018
- Posts
- 566
For all intents and purpose NO. Could you mount the belt to the build plate so it is flat, then measure the offset need to apply the first layer to the belt backing surface, yes.. would it stick, maybe, would it stay on in use NO.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion