Results 1 to 3 of 3
Threaded View
-
06-09-2014, 01:20 PM #2
- Join Date
- Sep 2013
- Location
- Saskatchewan, Canada
- Posts
- 294
No, layer height depends on how finely you can adjust the Z axis. Projector or laser determines your X/Y resolution.
For example, the Peachy uses water droplets to adjust the Z axis, and yes, the layers are basically invisible if you run it slowly.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion