Results 1 to 10 of 14
Thread: Prints with holes
Threaded View
-
06-09-2014, 10:28 AM #8
So its normal that holes are always smaller for aprox 0.2-0.8mm (in this case with a diameter hole of 12) and there is nothing to do about it?
Kinda hoped it was a setting in my printer that made it not as precise,
Well i guess i will try to drill it, If it doesnt work well i will probably buy some gears in metal if thats the case.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion