Results 1 to 4 of 4
-
05-26-2023, 06:35 AM #1
- Join Date
- May 2023
- Posts
- 5
qidi i-fast standard extruder temperature
HiCan any one tell me what the i-fast standard extruder temperature is. I have searched everywhere and can find no documentation on it at all.
-
05-26-2023, 10:12 AM #2
- Join Date
- May 2020
- Posts
- 626
If it's anything like the standard extruder in my X CF pro anything over 240 will probably give you problems.
-
05-26-2023, 02:01 PM #3
- Join Date
- May 2023
- Posts
- 5
Sence Qidi Provided no documentation on the I-Fast standard extruder. I don't know what to compare it to. I need to what the top temperature is so I know when to use the high temp extruder.
It just seems like this was a simple and important piece of info to leave out.
-
05-26-2023, 03:37 PM #4
- Join Date
- May 2020
- Posts
- 626
You can always email Qidi and ask them.
I very rarely print anything other than ASA and I know the standard extruder set up does not like sustained temps above 240 because the teflon tube starts to char and deform at the end, well mine did anyway.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion