Results 1 to 8 of 8
Thread: ABS printing issues.
Threaded View
-
03-06-2023, 02:18 AM #8
- Join Date
- Mar 2023
- Posts
- 1
Maybe you can check whether below is helpful to your ABS 3D Printing case:Use a heated print bed with a temperature of 110°C or higher13.Apply an adhesive layer on the print bed such as glue stick, hairspray, or ABS slurry34.Enclose your printer to maintain a stable temperature and prevent drafts14.Reduce your cooling fan speed or turn it off completely45.Increase your nozzle temperature to 230°C or higher15.Print at a lower speed and layer height to improve layer adhesion5.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion