Results 1 to 4 of 4
Thread: Spider monster
-
01-19-2023, 07:03 PM #1
- Join Date
- Jun 2022
- Location
- The great state of Texas
- Posts
- 167
Spider monster
A ton of fun to model and a good learning experience for ball and socket design. In the printer now. I am printing on the large side so around 12 inches long and 16 inches wide depending on how I pose it. It has 27 individual parts which will take around 4 to 5 days to print.
-
01-26-2023, 04:20 PM #2
- Join Date
- Jun 2022
- Location
- The great state of Texas
- Posts
- 167
This felt like forever to print. Finally done. I need to pose and glue it up and then primer, sand and paint.
Should have the final piece done in a week or so. A lot of projects in the hopper.
-
02-01-2023, 12:40 PM #3
- Join Date
- Jun 2022
- Location
- The great state of Texas
- Posts
- 167
lol. It makes my mech look small. This was a ridiculous print. Final size is around 18" x 18" and 9" tall.
-
02-09-2023, 05:47 PM #4
- Join Date
- Jun 2022
- Location
- The great state of Texas
- Posts
- 167
Finally got it painted. Super pleased with this project.
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help