Results 1 to 8 of 8
Thread: New 3D print user needs help
Threaded View
-
01-12-2023, 12:51 PM #3
- Join Date
- May 2020
- Posts
- 626
See if there is anything in the slicer software that lets you split or cut an stl file.
Prusa slicer shown which seems to be an excellent slicerLast edited by Bikeracer2020; 01-12-2023 at 01:11 PM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion