Results 1 to 3 of 3
Thread: What is wrong with my printer?
-
12-20-2022, 05:49 AM #1
- Join Date
- Dec 2022
- Posts
- 4
What is wrong with my printer?
Hi
I have a Anycubic i3 mega S which is giving me weird problems. For example it was makeing weird noises and mixing different files during print, all of a sudden; Super wierd.
I thought the SD was corrupted so I started using a new one. I've printed some square tiles for d&d and had no problemens but noticed the square were not perfeclty square so I decided to print a Calibration cube with Cura calibration plugins.
Again crazy noises and printer doing crazy things. Tryed to download a calibration cube and print it; same problems. Tryed to change SD; still the same.
I thought "that's it my printer is done."
Then I tryed to print again the square tile and it's printing it without any problems....
What is wrong with my printer?
Here is a video of the problem. Skip to minute 1 if you want to see it.
https://youtu.be/4D5BNj9CB1I
Hope you can help
-
01-04-2023, 04:26 PM #2
- Join Date
- Dec 2022
- Posts
- 4
Hi Avensis. It looks like the problem is about faulty SD card/not properly removing an external dirver...Most probably the second one, yet I've been removing the SD card in the same way for 3 years and now all of a sudden it gives me problem and I have to do everything with the outmost care.
-
01-12-2023, 12:35 PM #3
- Join Date
- Jan 2023
- Posts
- 3
Have you tried printing directly from a USB connection? Take the SD card out of the equation?
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help