Results 1 to 3 of 3
Threaded View
-
12-12-2022, 12:14 PM #3
- Join Date
- Jun 2022
- Location
- The great state of Texas
- Posts
- 152
The image is really small and not very smooth. Is that what you were aiming at (hand drawn look)?
You can make an STL relatively easy from a black and white or grey scale image with different software but doesn't mean it will look good. As mentioned, Fusion360 can do it. If you want a smoother model, you will need a pre-made font for the words or hand drawn in a 2d/3d software.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion