Results 1 to 5 of 5
Threaded View
-
12-09-2022, 11:42 AM #4
- Join Date
- Jun 2014
- Posts
- 885
The concept is wonderful, generally speaking, but the execution is far too demanding, as you've discovered. It might take an incredible programmer to build a post-processor to take either an STL or g-code and create the desired ribs. Probably STL, as g-code is mostly last step for just about everything.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion