Results 1 to 2 of 2
Thread: Raise 3d Pro3 Printer Help
-
12-08-2022, 11:32 AM #1
- Join Date
- Dec 2022
- Posts
- 1
Raise 3d Pro3 Printer Help
Hello,Relatively new to 3d printing.Having an issue where the layer isnt printing flat and then its also causing the print to shift.I attached some pictures and the settings from Ideamaker.Using a 0.8mm nozzle.ThanksJim
-
12-08-2022, 02:53 PM #2
- Join Date
- May 2020
- Posts
- 626
If you don't get a reply on here you could try the Raise 3D forum
https://forum.raise3d.com/viewforum....94aa1f003eb987
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion