Results 1 to 3 of 3
Thread: Bresser Raptor Issues
-
10-17-2022, 03:15 AM #1
- Join Date
- Oct 2022
- Posts
- 3
Bresser Raptor Issues
Hi All,I am having problems with my new Bresser Raptor. When I print, the head goes all the way to the left then makes a really load grinding noise, the print job then starts to print on the left side and not in the middle. When I check the Axis in the settings, 0-100 is correct and the head moves to the correct location. It's a really weird problem and any help would be appreciated. Regards,Leggy
Last edited by leggyweggy; 10-17-2022 at 04:54 AM. Reason: More info
-
10-17-2022, 04:54 AM #2
- Join Date
- Oct 2022
- Posts
- 3
If it helps, the model is similiar to the Weedo Tina 2
-
10-18-2022, 02:52 PM #3
- Join Date
- Oct 2022
- Posts
- 3
Resolved, the limit switch was not 100% plugged in correctly.
Printing time- Is this right?
09-13-2024, 07:51 AM in General 3D Printing Discussion