Results 1 to 7 of 7
Thread: issues after filament change
Threaded View
-
10-05-2022, 07:22 AM #4
- Join Date
- Jun 2014
- Posts
- 885
Slowing the speed was a good idea. With all you've done, it leaves an inaccurate return to location. Examine the position of the z-axis screws at the point of the pause. Perhaps add a masking tape flag to the top or bottom of the z-screw to better see the location. When the printer pauses, it will be in one direction. When it resumes, is the location skewed?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion