Close



Results 1 to 2 of 2
  1. #1
    Engineer-in-Training Hugues's Avatar
    Join Date
    May 2014
    Location
    Switzerland
    Posts
    219

    How much resin do you need to put in the vat ?

    Sorry for all these questions, I'm a bit impatient LOL.

    Was wondering, how much resin do we need to poor in the vat for a print ? Can we put back the leftover resin in the container ?

  2. #2
    Kudo3D Representative
    Join Date
    May 2014
    Location
    San Francisco
    Posts
    31
    Not at all!

    If the VAT is well leveled, minimum resin requirement is about 80ml. Yes, you can recycle the resin. However, the property of leftover resin is slightly changed after each use. We recommend mixing one portion of the old resin with one portion of the fresh resin to maintain the stability of the resin. Therefore, it is better to store the leftover in another container. Also, please remember to filter the resin to avoid damaging the Teflon film. Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •