Results 1 to 1 of 1
-
09-20-2022, 10:59 PM #1
- Join Date
- Sep 2022
- Posts
- 1
100% fill required for first layer
Hello,I am trying to print a small pegboard hook on my Anycubic Kobra using Prusa Slicer 2.5.0 and am finding that I need a 100% infill on that layer. As can be seen by the picture this is not occurring but I cannot seem to find a setting to instruct the slicer to do this.
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help