Results 1 to 1 of 1
-
07-31-2022, 11:23 PM #1
- Join Date
- Jul 2022
- Posts
- 1
"Skipped" layers (horizontal gaps) with Ender 3pro and ABS
ABS (with enclosure) seems to be printing mostly fine but getting horizonal gaps. Any suggestions. Ender 3Pro with enclosure, glass and auto-leveling. CURA settings: 0.6 nozzle with 0.6 line width, 0.2 layer height, 240nozzle, 105table, no cooling (except bridges at 50% - experimental feature). 6.5 retraction with 25mm speed.
IMG_1441.jpg
Resin has changed after...
06-18-2024, 10:34 AM in General 3D Printing Discussion