Results 1 to 2 of 2
Threaded View
-
07-14-2022, 08:29 AM #2
Nope.
Like everything else if you keep the draw clean it's fine.
If you don't it isn't.
Whether the divider is 3dprinted or not - isn't an issue.
Nope.
Like everything else if you keep the draw clean it's fine.
If you don't it isn't.
Whether the divider is 3dprinted or not - isn't an issue.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion