Results 1 to 3 of 3
Thread: Making a mesh file printable
-
08-04-2021, 12:27 PM #1
- Join Date
- Aug 2021
- Posts
- 1
Making a mesh file printable
Putting a project together and I am looking to 3d print a front bumper off a lamborghini huracan. I have found a .STL file on grab cad but it is so thin it is no exisitent. Is there a way to thicken the part to where it could be printed?
https://grabcad.com/library/huracan-1
-
11-11-2021, 02:18 PM #2
- Join Date
- Apr 2021
- Posts
- 186
Yes. Use meshmixer. Then use the create solid tool. Set a high resolution and accuracy, using the preserve sharp edges option, and sets minimum thickness that suits your printer.
-
07-04-2022, 04:24 AM #3
- Join Date
- May 2022
- Location
- Florida
- Posts
- 1
Meshmixer is a good tool to use. Then utilize the tool to make solids. Make sure your printer can handle a high resolution and precision by enabling the option to preserve sharp edges and adjusting the minimum thickness to fit your needs.
quordle
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help