Results 1 to 10 of 13
Thread: Print perforation
Threaded View
-
06-14-2022, 08:35 AM #7
- Join Date
- Jun 2022
- Posts
- 7
It's not quite what it needs to be in order to work. The perforation must be minuscule. About 0.6-0.8mm holes and the holes must be placed all over the model. The water has to be able to get sucked evenly through every point of the object, much like a sieve in the shape of a flower pot.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion