Results 1 to 4 of 4
-
05-10-2022, 01:47 AM #1
- Join Date
- May 2022
- Posts
- 2
Help Finding an Appropriate Filament to Print
I need help finding a filament to print. The characteristics are: Flexible 'silicon' style material Heat resistant so that a 24v bulb can be seated Does not go brittle over time All the limited experience I see with 3d printing are hard plastics. Does this area of softer materials exist?
-
05-10-2022, 03:42 AM #2
- Join Date
- Jun 2014
- Posts
- 885
Soft PLA is a product, but I don't think it would hold up well to the heat. There are TPU filaments which are flexible and quite strong. The rigidity of the part depends on the design and the number of perimeters. Yet another flexible filament is OBC, but no references are found regarding temperature.
-
05-10-2022, 03:25 PM #3
- Join Date
- May 2018
- Posts
- 566
This would probably fit your needs https://ninjatek.com/shop/cheetah/
-
01-15-2023, 02:02 PM #4
- Join Date
- Jan 2023
- Posts
- 36
Just watch the fumes
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion